Photopolymer Plate Maker Machine
Agency: | DEPT OF DEFENSE |
---|---|
Level of Government: | Federal |
Category: |
|
Opps ID: | NBD00159053275267711 |
Posted Date: | Apr 18, 2024 |
Due Date: | May 1, 2024 |
Solicitation No: | W519TC24Q7478 |
Source: | https://sam.gov/opp/a1370cea53... |
APEX Accelerators are an official government contracting resource for small businesses. Find your local APEX Accelerator (opens in new window) for free government expertise related to contract opportunities.
APEX Accelerators are funded in part through a cooperative agreement with the Department of Defense.
The APEX Accelerators program was formerly known as the Procurement Technical Assistance Program (opens in new window) (PTAP).
- Contract Opportunity Type: Combined Synopsis/Solicitation (Updated)
- All Dates/Times are: (UTC-05:00) CENTRAL STANDARD TIME, CHICAGO, USA
- Updated Published Date: Apr 18, 2024 10:23 am CDT
- Original Published Date: Apr 17, 2024 05:49 am CDT
- Updated Date Offers Due: May 01, 2024 01:00 pm CDT
- Original Date Offers Due: Apr 24, 2024 01:00 pm CDT
- Inactive Policy: 15 days after date offers due
- Updated Inactive Date: May 16, 2024
- Original Inactive Date: May 09, 2024
-
Initiative:
- None
- Original Set Aside:
- Product Service Code: 3445 - PUNCHING AND SHEARING MACHINES
-
NAICS Code:
- 333517 - Machine Tool Manufacturing
-
Place of Performance:
White Hall , AR 71602USA
This Photopolymer Plate Making Machine will be used to make photopolymer plates to mark items. The machine will need to be able to make plates from 9” by 12” unexposed photopolymer sheets. This machine will use UV light to expose the photopolymer sheets through a negative with a plastic film covered vacuum table to hold materials stationary. The UV light will pass through the clear sections of the negative and harden the exposed portions of the photopolymer sheet. The exposed sheet is attached to the sticky plate above the wash out station. Oscillating brushes in water will remove the soft areas of the photopolymer sheet, leaving only exposed areas. A drying drawer is used to dry each plate before a final curing stage under the UV light to complete the process.
Photopolymer Plate Making Machine:
Model: T-12 CE
Plate: 11-3/4” X 16-1/2”
Volt: 230
Amp: 15
kW: 3.5
Hz: 60
Machine consists of the following:
- Heated water-based washout unit with brushes and a plate: 11-3/4” X 16-1/2”
- UV drawer with vacuum and plastic sheet.
- Drying drawer
Electronic time settings in seconds for each phase of the process that can be manually changed once set.
- ACC ROCK ISLAND BLDG 60 3055 RODMAN AVE
- ROCK ISLAND , IL 61299-0000
- USA
- Ashley Kulla
- Ashley.e.kulla.civ@army.mil
- John Fotos
- john.g.fotos.civ@army.mil
- Apr 18, 2024 10:23 am CDTCombined Synopsis/Solicitation (Updated)
- Apr 17, 2024 05:49 am CDT Combined Synopsis/Solicitation (Original)
TRY FOR FREE
Not a USAOPPS Member Yet?
Get unlimited access to thousands of active local, state and federal government bids and awards in All 50 States.